Body assembly work, exterior

Fender

6steps
~36min
2/5difficulty
0102030405064N·mlb·ft
Tightening torque found on this page
Done 0 of 6

Assembly overview - Fender


Note

The illustration shows the left side. Apply accordingly for the right side.

VW UP. Karosserie-Montagearbeiten AuГџen

  1. Fender
    • Remove and install
  2. A-pillar trim
    • Remove and install
  3. Damping, web section
    • inserted between fender and A-pillar
  4. Expanding rivet
  5. Bolt
    • 2 pieces
    • Tightening torque: 6 N·m
  6. Bolt
    • 2 pieces, A-pillar
    • 1 piece, wheel arch
    • 1 piece, rocker panel
    • 2 pieces, fender connector
    • Tightening torque: 6 N·m

Removing and installing fender

Removing and installing fender

Required special tools, testers and equipment, and auxiliary items

  • Torque wrench -V.A.G 1783-

Removing


Note

Removal and installation are only described for the left fender. Apply accordingly for removal and installation of the right fender.

VW UP. Karosserie-Montagearbeiten AuГџen

VW UP. Karosserie-Montagearbeiten AuГџen

Carry out the following work:

- Remove front wheel arch liner.

- Remove side turn signal → Electrical System.

- Remove front bumper cover.

- Remove side guide strip -5- for front bumper cover.

- Remove cowl panel cover.

- Pull out damping, web section.

- Unscrew bolts -2 and 6-.

- Carefully remove fender -1-.

Installing


Note

Install fender -1- without stress.

VW UP. Karosserie-Montagearbeiten AuГџen

Carry out the following work:

Install fender -1- in the reverse order of removal.

- With the fender brace loosened, align the fender without stress.

- Be sure to insert the zinc interlayer -AKL 381 035 50- between the fender and rocker panel.

- Tightening torques for bolts -2 and 6-.

- Check parallelism and gap dimensions.

Removing and installing fender brace

Required special tools, testers and equipment, and auxiliary items

  • Torque wrench -V.A.G 1783-
VW UP. Karosserie-Montagearbeiten AuГџen


Note

Removal and installation are only described for the left fender brace. Apply accordingly for removal and installation of the right fender brace.

VW UP. Karosserie-Montagearbeiten AuГџen

Removing

- Remove front bumper cover

- Remove side guide strip for front bumper cover.

- Unscrew front fender mounting bolts from fender brace -4-.

- Unscrew bolts -2- and remove fender brace -1-.

Installing

- The fender brace is fitted to the hood and bumper together with the fender.

Tightening torque bolts -2-: 6 N·m.