Communication

Sound System

7steps
~42min
2/5difficulty
Done 0 of 7

Installation Locations Overview - Sound System


Note
  • In conjunction with the radio, the front speaker system consists of a 2-way system with one woofer in each front door, left and right, and one tweeter in each front A-pillar trim, left and right. One woofer is installed on each side of the rear passenger compartment. The midrange frequencies are reproduced by the tweeters and woofers.
  • All speakers are passive speakers.
VW UP. Kommunikation

  1. Front right tweeter -R22-
    • installed in right A-pillar trim
    • "Removing and Installing Front Tweeter"
  2. Front right woofer -R23-
    • installed in right door
    • "Removing and Installing Front Woofer"
  3. Rear right woofer -R17-
    • Installed in right side wall trim in passenger compartment
    • "Removing and Installing Rear Woofer"
  4. Rear left woofer -R15-
    • Installed in left side wall trim in passenger compartment
    • "Removing and Installing Rear Woofer"
  5. Front left woofer -R21-
    • installed in left door
    • "Removing and Installing Front Woofer"
  6. Front left tweeter -R20-
    • installed in left A-pillar trim
    • "Removing and Installing Front Tweeter"
  7. Radio -R-
    • optional portable navigation and infotainment system -J982-
    • "Portable Navigation and Infotainment System -J982-"

Removing and Installing Front Woofer


Note

Removal and installation are the same on the left and right sides.

Removing

Before starting installation work, carry out the following:

- Switch off ignition and all electrical consumers and remove ignition key.

To replace a speaker, first remove the door trim → Trim Panels/Insulation.

- Release the connector lock on the speaker in the direction of the arrow and pull out connector -1-.

VW UP. Kommunikation

- Drill out rivets -arrows- with a suitable drill bit (<4.5 mm). Remove speaker.


Note
  • Be sure to remove all metal shavings from the door, otherwise corrosion damage will result.
  • If drilling out the rivets has damaged the paint, repair it immediately.

Installing

VW UP. Kommunikation

- Insert speaker in the direction of the arrow and secure with 4 rivets -1-.


Note

When installing, secure the new speaker with special blind rivets (observe part number!).

- Reconnect the connector to the speaker.

Installation is carried out in reverse order.

VW UP. Kommunikation

Removing and Installing Rear Woofer


Note

Removal and installation are the same on the left and right sides.

Removing

Before starting installation work, carry out the following:

- Switch off ignition and all electrical consumers and remove ignition key.

To replace a speaker, first remove the side wall trim → Trim Panels/Insulation.

- Release the connector lock on the speaker in the direction of the arrow and pull out connector -1-.

VW UP. Kommunikation

- Drill out rivets -arrows- with a suitable drill bit (<4.5 mm). Remove speaker.


Note
  • Be sure to remove all metal shavings from the door, otherwise corrosion damage will result.
  • If drilling out the rivets has damaged the paint, repair it immediately.

Installing

VW UP. Kommunikation

- Insert speaker into trim and secure with 4 rivets.


Note

When installing, secure the new speaker with special blind rivets (observe part number!).

Installation is carried out in reverse order.

VW UP. Kommunikation

Removing and Installing Front Tweeter


Note

Removal and installation are the same on the left and right sides.

Removing

Before starting installation work, carry out the following:

- Switch off ignition and all electrical consumers and remove ignition key.

To replace a speaker, first remove the A-pillar trim → Trim Panels/Insulation.

- Disconnect connector -1- from tweeter -2-.

Installing


Note

The tweeter forms one unit with the A-pillar trim and can only be replaced together with it. When ordering spare parts, observe the color number of the trim.

Installation is performed in reverse order!

VW UP. Kommunikation