Body assembly work, exterior
Fuel filler flap unit
In this manual: Body assembly work, exterior
3steps
~18min
2/5difficulty
Done 0 of 3
Assembly overview - Fuel filler flap unit

- Fuel filler flap unit
- Remove and install
- Fuel filler flap
- Water drain hose
- routed between wheel arch and wheel arch liner
Removing and installing the fuel filler flap unit
Removing
![]()
Note
- The fuel filler flap unit may be engaged in the side panel with 1 or 2 latch hooks.
- Accordingly, there are 1 or 2 markings on the fuel filler flap unit.
- The illustrations show the version with 1 latch hook.

Carry out the following work:
- Unscrew the fuel filler cap.
- Insert a screwdriver -2- through the marked opening -3-.
- Release the latch hook -arrow b-.
- Swing fuel filler flap unit -1- out of the side panel -arrow c-.
- Guide water drain hose -4- out of the side panel.
Installing

Carry out the following work:
- Insert water drain hose -3- through the opening in the fuel filler flap unit -1- and pull it through until it stops.
- Push water drain hose -3- into the side panel.
- Swing fuel filler flap unit -1- into the side panel and pull the boot over the filler neck.
- Then push the fuel filler flap unit fully into the side panel. Make sure that latch hook -2- engages correctly in the side panel.
- Perform a function check of the unlocking components.
Was this page helpful?