Audi A3 Quiz
Ventilation, Heating and Air Conditioning Systems

Removal and Installation of Fresh Air Blower

In this manual: Ventilation, Heating and Air Conditioning Systems
Owner's Manual — 42Routine Care and Maintenance — 32Engine — 22Engine Cooling System — 9Ventilation, Heating and Air Conditioning Systems — 11Fuel System — 9Fuel Injection System — 4Diesel engine injection system — 5Exhaust System — 9Electronic Ignition and Fuel Injection Control System — 6Charging and Starting Systems — 12Manual transmission — 12Clutch and Drive Shafts — 6Brake System — 13Front Suspension — 5Rear Suspension — 6Steering — 7Body — 70Body Electrical Equipment — 37Wiring Diagrams — 35
~1min read

REMOVAL

PROCEDURE

1. Remove the glove box, refer to Removal and Installation of Glove Box.

2. Remove the auxiliary resistor, refer to Removal and Installation of Auxiliary Resistor.

3. Disconnect the connector (A) from the blower (B). Lower the blower out of the heater housing (arrow in illustration).

4. If necessary, unscrew the 2 blower motor mounting bolts from the base plate. INSTALLATION

5. Insert the blower into the heater housing.

6. Secure the connector (A).

7. Install the auxiliary resistor, refer to Removal and Installation of Auxiliary Resistor.

8. Install the glove box, refer to Removal and Installation of Glove Box.

Test yourself

A quick Audi A3 quiz: every answer comes with an explanation and a link to the manual page.