Driving and Operation

Electronic Stability Control System

~1min read

The Electronic Stability Control (ESC) system improves vehicle stability when necessary, regardless of road surface type or tire grip. It also prevents drive wheel spin.

As soon as the vehicle begins to skid (actual path differs from the path intended by the driver), engine power is forcibly reduced and the wheels are braked individually. This improves vehicle stability on slippery road surfaces.

The Stability Control system is ready for operation as soon as the indicator light goes out.В момент активной работы системы ESC индикатор.

While the ESC system is actively operating, the indicator lightПредупреждениеflashes.

This active safety system does not allow the driver to drive aggressively.

Vehicle speed must be appropriate for road conditions.

DisplayОтключение.

Deactivation

Если водитель предпочитает болee активный стиль вождения, систему динамической стабилизации

If the driver prefers a more active driving style, the Electronic Stability Control system can be turned off. To do so, press and hold the buttonЗагорится индикаторfor approximately 7 seconds.

The indicator light will illuminateЧтобы снова включить систему

To turn the ESC system back on, press the buttonagain.

If the Traction Control System was turned off beforehand, pressing the button again will turn on both the Electronic Stability Control system and the Traction Control System.

In addition, the Electronic Stability Control system will turn on again the next time the ignition is switched on.

Test yourself

A quick Chevrolet Cruze quiz: every answer comes with an explanation and a link to the manual page.