Replacing a fuse
Procedure for replacing a faulty fuse with a new one to remedy a fault on the corresponding function.
The two fuse boxes are located under the dashboard and in the engine compartment.
Replacing a fuse
Before replacing a fuse, identify the cause of the fault and rectify it. Fuse numbers are shown on the fuse box.
Replace the faulty fuse with one of the same amperage (same colour).
Use the special puller 1 located on the cover near the fuse boxes. It also holds spare fuses.

Replacing a fuse
Fuses under the dashboard
Accessing the fuses
- open the glovebox until it stops, then pull it firmly horizontally,
- remove the trim by pulling sharply on the lower part.


When refitting the glovebox, observe the following precautions:
- Keeping the glovebox horizontal, refit the lower part, making sure the lower notches are correctly aligned with the pivots.
- Push sharply forward.
- Close the glovebox, making sure the springs behind pass over the top.
FUSE BOX A
Fuse table

FUSE BOX B

FUSE BOX C

Fuses in the engine compartment

Fuses in the engine compartment
Accessing the fuses
- Loosen each screw by 1/4 turn.
- Replace the fuse.
Fuse table


Fuse table

! The vehicle's electrical system is designed to operate with standard or optional equipment.
Before installing any other electrical equipment or accessories on your vehicle, consult the CITROËN dealer network.
CITROËN accepts no liability for costs incurred in restoring your vehicle or for malfunctions resulting from fitting auxiliary accessories not supplied or recommended by CITROËN and not installed in accordance with its instructions, particularly when the total consumption of all additional connected devices exceeds 10 milliamps.
MAXI fuses provide additional protection for the electrical systems. Any work must be carried out by the CITROËN dealer network.
Test yourself
A quick Citroen C5 Aircross quiz: every answer comes with an explanation and a link to the manual page.