Cruise control
General
In this manual: Cruise control
~1min read
PREAMBLE
The cruise control system maintains the vehicle speed at a value set by the driver.
The driver can:
- exceed the set speed by pressing the accelerator pedal,
- change the set speed by operating the cruise control switch.
Note: Cruise control only operates above 40 km/h.
CRUISE CONTROL FUNCTION BLOCK DIAGRAM

Cruise control function block diagram
Key:
- single arrow = wired link,
- triple arrow = multiplexed link.

LINKS |
||
LINK NO. |
SIGNAL |
SIGNAL TYPE |
| 1 | Cruise control switch status | VAN CAR 1 |
| 2 | Main brake switch status | ON / OFF |
| 3 | Cruise control switch status. Driver request to activate / deactivate cruise control. Main brake switch status. Main brake switch information fault |
CAN |
| 4 | Vehicle speed information | CAN |
| 5 | Accelerator pedal position | ANALOGUE |
| 6 | Electronic throttle control | ANALOGUE |
| 7 | Electronic throttle position | ANALOGUE |
| 8 | Gearbox ratio information. Selector lever position information |
CAN |
| 9 | Cruise control status information | CAN |
| 10 | Clutch switch status | ON / OFF |
| 11 | Secondary brake switch status | ON / OFF |
| 12 | Cruise control status information. Cruise control fault information |
CAN |
Test yourself
A quick Citroen C5 Aircross quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?