AAS - Parking Aid
Aftersales operations: parking aid
In this manual: AAS - Parking Aid
~1min read
Faults are stored in the parking aid ECU.
Faults are indicated by a specific audible signal from the rear buzzer.
FAULT READING
The following faults can be read with the diagnostic tool:
- rear left sensor faulty,
- rear right sensor faulty,
- rear left centre sensor faulty,
- rear right centre sensor faulty,
- rear right centre sensor faulty,
- rear right centre sensor faulty,
- rear right centre sensor faulty,
ACTUATOR TEST
The rear buzzer can be tested with the diagnostic tool.
CODING
The following settings can be coded with the diagnostic tool:
- number of sensors,
- presence of a deactivation switch,
- use of the buzzer (on this application, the vehicle speakers are not accessible via the VAN network),
- rear buzzer volume adjustment.
CONNECTOR LINKED TO THE PARKING ASSIST ECU
Note: The sensors are not paired with the parking assist ECU
Two connectors are linked to the parking assist ECU.
Connector pin assignment for a four-sensor module.

Test yourself
A quick Citroen C5 Aircross quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?