Intruder alarm
Operating principle
In this manual: Intruder alarm
~1min read
OPERATING MODE
The intruder alarm operates in the following modes:

STANDBY / EXIT STANDBY
Putting the alarm on standby
The vehicle is placed under protection when superlocking using the high-frequency remote control only.
Alarm on standby: a break-in or power cut triggers the siren for 30 seconds.
The alarm returns to standby at the end of the time delay or when power is restored.
Taking the alarm off standby
Whether the alarm has been triggered or not, it is taken off standby by the following operations:
- unlocking with the high-frequency remote control,
- or authentication of the key when switching on +APC (after unlocking with the key).
Display
An LED visible from outside, located on the volumetric deactivation push button, shows the operating mode of the alarm:

Note: The LED lit steadily with +APC indicates a fault on the siren control network.
Test yourself
A quick Citroen C5 Aircross quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?