Trip computer
Each press of the button, located at the end of the wiper control stalk, successively displays the different on-board computer data, depending on the screen.
the “Vehicle” tab with:
- range, instantaneous consumption and distance to empty, or the Stop & Start timer,
the “1” tab (trip 1) with:
- average speed, average consumption and distance traveled, calculated for trip “1”,
the “2” tab (trip 2) with the same data for a second trip.
! Reset When the desired trip is displayed, press and hold the control for more than two seconds. DEFINITIONS Range:displays the number of kilometres that can be driven with the fuel remaining in the tank, based on the average consumption over the last kilometres driven.
This displayed value may vary considerably following a change in vehicle speed or the terrain of the route.
As soon as the range is less than 30 km, dashes are displayed.
After refuelling of at least 5 litres, the range is recalculated and displayed once it exceeds 100 km.
If dashes are displayed continuously while driving instead of figures, consult a CITROËN dealer.
Instantaneous consumption:calculated and displayed only from 30 km/h.
Average consumption: the average amount of fuel consumed since the last reset of the trip computer.
Distance travelled:calculated from the last reset of the on-board computer.
Distance to empty:Calculated based on the final destination entered by the user. If guidance is active, the navigation system calculates it in real time.
Average speed:this is the average speed calculated since the computer was last reset (ignition on).
Stop & Start timer(minutes / seconds or hours / minutes) If your vehicle is equipped with Stop & Start, a timer accumulates the time spent in STOP mode during the journey.
It resets each time the ignition is switched on with the key.
Test yourself
A quick Citroen C5 quiz: every answer comes with an explanation and a link to the manual page.