Ford Fiesta Quiz
Manual Transmission, Clutch, Transfer Case and Power Transfer Unit

Transmission Drain and Fill - General Procedures

In this manual: Manual Transmission, Clutch, Transfer Case and Power Transfer Unit
Service Information — 27Suspension — 48Transmission — 9Brake System — 52Steering — 21Engine — 140Manual Transmission, Clutch, Transfer Case and Power Transfer Unit — 48Exhaust System — 6Fuel System — 21Climate Control System — 58Instrumentation and Warning Systems — 26Battery and Charging System — 20Infotainment Systems — 41Lighting — 29Power Distribution — 11Electronic Function Group — 30Body and Paint — 275Frame and Mounting — 3
9steps
~54min
2/5difficulty
0204060801004030N·mlb·ft
Tightening torque found on this page
Done 0 of 9

Materials

Name Specification
Motorcraft® Dual Clutch Transmission Fluid
XT-11-DCTF		 WSS-M2C200-D2

Draining

  1. With the vehicle in N position, raise it on a hoist.
    Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation).
  2. If equipped.
    Remove the retainers and the underbody shield.
  3. Remove the drain plug and drain the transmission fluid.
  4. Install the drain plug.
    Torque: 30 lb-ft (40 N·m)

Filling

  1. Remove the fill plug.
  2. Fill the transmission.
    Material: Motorcraft® Dual Clutch Transmission Fluid / XT-11-DCTF (WSS-M2C200-D2)
  3. Remove enough fluid so that it is 0.79 in (20 mm) below the fill hole.
  4. Install the fill plug.
    Torque: 30 lb-ft (40 N·m)
  5. If equipped.
    Install the underbody shield.

Test yourself

A quick Ford Fiesta quiz: every answer comes with an explanation and a link to the manual page.