Ford Fiesta Quiz
Manual Transmission, Clutch, Transfer Case and Power Transfer Unit

Transmission Fluid Level Check - General Procedures

In this manual: Manual Transmission, Clutch, Transfer Case and Power Transfer Unit
Service Information — 27Suspension — 48Transmission — 9Brake System — 52Steering — 21Engine — 140Manual Transmission, Clutch, Transfer Case and Power Transfer Unit — 48Exhaust System — 6Fuel System — 21Climate Control System — 58Instrumentation and Warning Systems — 26Battery and Charging System — 20Infotainment Systems — 41Lighting — 29Power Distribution — 11Electronic Function Group — 30Body and Paint — 275Frame and Mounting — 3
7steps
~42min
2/5difficulty
0204060801004030N·mlb·ft
Tightening torque found on this page
Done 0 of 7

Materials

Name Specification
Motorcraft® Dual Clutch Transmission Fluid
XT-11-DCTF		 WSS-M2C200-D2

Check

  1. With the vehicle in N position, raise it on a hoist.
    Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation).
  2. If equipped.
    Remove the retainers and the underbody shield.
  3. Remove the fill plug.
  4. If necessary, add transmission fluid.
    Material: Motorcraft® Dual Clutch Transmission Fluid / XT-11-DCTF (WSS-M2C200-D2)
  5. Remove enough fluid so that it is 0.79 in (20 mm) below the fill hole.
  6. Install the fill plug.
    Torque: 30 lb-ft (40 N·m)
  7. If equipped.
    Install the underbody shield.

Test yourself

A quick Ford Fiesta quiz: every answer comes with an explanation and a link to the manual page.