Ford Focus Quiz
Powertrain

Pump Assembly

In this manual: Powertrain
Vehicle - General — 4Accessories — 40Body — 237Chassis — 113Electrical — 19HVAC — 44Powertrain — 292
~1min read
1special tools
01020304050107N·mlb·ft
Tightening torque found on this page
Special Tool(s)
Installer, Drive Pinion Oil Seal 205-115 (15058)

Material
Item Specification
Motorcraft® MERCON® LV Automatic Transmission Fluid XT-10-QLVC (US); CXT-10-LV12 (Canada) MERCON® LV
Disassembly
  1. Remove the top portion of the pump.
  1. Inspect the lower portion of the pump and gear pocket for nicks, scratches, gouges or wear.
  1. Remove the pump seal.
  1. Inspect the upper portion of the pump for nicks, scratches or gouges.
  1. Inspect the pump gears for nicks, scratches or gouges.
Assembly
  1. NOTE: The smaller gear has a recess on both sides. NOTE:

    The smaller recess must face away from the torque converter seal.

    NOTE:

    The larger recess, with the beveled edge, must face toward the torque converter.

    Lubricate the gears and thrust washers with clean transmission fluid.
  1. Using the Drive Pinion Oil Seal Installer, install the pump seal.
    • Lubricate the gears and thrust washers with transmission fluid.
  1. Install the top portion of the pump and install the pump bolts.
    • Tighten to 10 N·m.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.