Seat Backrest - Rear - Disassembly and Assembly

For component identification and locations, refer to Seat — Exploded View, Rear in this section.

1. 1
   Remove the rear seat backrest. For additional information, refer to Seat Backrest — Rear in this section.
2. 2
   Remove the backrest cover. For additional information, refer to Seat Backrest Cover — Rear in this section.
3. 3
   Remove the backrest foam pad.

   • Route the release strap through the hole in the foam pad.
4. 4
   Release the retainer and detach the release cable from the backrest frame.
5. 5
   Remove the 2 nuts and backrest latch.

   • To install, tighten to 22 N·m.
6. 6
   To assemble, reverse the disassembly procedure.