Body
Seat Backrest - Rear - Removal and Installation
In this manual: Body
6steps
~36min
2/5difficulty
Done 0 of 6
Seat Backrest — Rear 
Seat Backrest Hinges — Rear
Removal and Installation All backrests
| Item | Part Number | Description |
|---|---|---|
| 1 | — | Backrest assembly, 60 percent |
| 2 | — | Backrest assembly, 40 percent |
| 3 | W505264 | Backrest-to-hinge bolt, LH (2 required) |
| 4 | W505264 | Backrest-to-hinge bolts, center (4 required) |
| 5 | W505264 | Backrest-to-hinge bolt, RH (2 required) |
Seat Backrest Hinges — Rear
| Item | Part Number | Description |
|---|---|---|
| 1 | W700883 | Backrest hinge-to-floor bolts, RH (2 required) |
| 2 | 613B90 | Backrest hinge, RH |
| 3 | W700883 | Backrest hinge-to-floor bolts, center (2 required) |
| 4 | A60615 | Backrest hinge, center |
| 5 | W700883 | Backrest hinge-to-floor bolts, LH (2 required) |
| 6 | 613B91 | Backrest hinge, LH |
Removal and Installation All backrests
- With the backrest lowered, fold back the corners of the backrest cover to gain access to all 4 bolts.
- Remove the 4 backrest-to-hinge bolts.
- To install, tighten to 28 N·m.
- NOTICE: Do not remove the seat backrest by separating the center backrest hinge. Doing so may damage the hinge bushings.
Separate the backrest from the hinges and remove.
- For center backrest hinge, remove the 40 and 60 percent seat backrests.
- For LH or RH backrest hinge:
- For 2-door, remove the quarter trim panel. For additional information, refer to Section 501-05.
- For 4-door, remove the rear seat backrest bolster. For additional information, refer to Seat Bolster — Rear in this section.
- Remove the 2 bolts and backrest hinge.
- To install, tighten to 47 N·m.
- NOTE: Before installation, make sure the safety belt webbing is not twisted and the safety belts and buckles are accessible to the occupants.
To install, reverse the removal procedure.
Test yourself
A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?