Seat Cushion - Rear

For component identification and locations, refer to Seat — Exploded View, Rear in this section.

1. 1
   Remove the rear seat cushion.

   • Locate the cushion latch releases under the cushion front edge.

   • Push to release the 2 latches and remove the cushion.
2. 2
   Remove all the hog rings from the outer edge of the cushion cover.
3. 3
   Invert the cushion cover and remove all the inner rows of hog rings.
4. 4
   Remove the cushion cover.
5. 5
   To remove the seat cushion latches, use an appropriate tool to release the locking tabs and pry upwards.
6. 6
   NOTE: Make sure the safety belt webbing is not twisted and the safety belts and buckles are accessible to the occupants.

   To assemble, reverse the disassembly procedure.