Body
Seat Cushion Cover - Rear
In this manual: Body
5steps
~30min
2/5difficulty
Done 0 of 5
Removal and Installation
- Remove the rear seat cushion.
- Locate the cushion latch releases under the cushion front edge.
- Push to release the 2 latches and remove the cushion.
- Remove all the hog rings from the outer edge of the cushion cover.
- Invert the cushion cover and remove all the inner rows of hog rings.
- Remove the cushion cover.
- NOTE: Make sure the safety belt webbing is not twisted and the safety belts and buckles are accessible to the occupants.
To install, reverse the removal procedure.
Test yourself
A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?