Seat Bolster - Rear

RH shown, LH similar.

1. 1
   Remove the rear seat cushion.

   • Locate the cushion latch releases under the cushion front edge.

   • Push to release the 2 latches and remove the cushion.
2. 2
   Remove the seat bolster nut from the lower stud.

   • To install, tighten to 6 N·m.
3. 3
   From the luggage compartment, release the upper retainer behind the seat bolster and remove.

   • If installing a new seat bolster, install a new upper retainer.
4. 4
   NOTE: Make sure the safety belt webbing is not twisted and the safety belts and buckles are accessible to the occupants.

   To install, reverse the removal procedure.