Electrical

Headlamp Switch. Removal and Installation

4steps
~24min
2/5difficulty
010203040502.52N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Removal

  1. Release the clips and remove the steering column opening trim panel.
    Ford Fusion. Headlamp Switch. Removal and Installation
  2. Remove the screws and set aside the left instrument panel trim panel.
    Torque: 22 lb-in (2.5 N·m)
    Ford Fusion. Headlamp Switch. Removal and Installation
  3. Disconnect the electrical connector.
    Ford Fusion. Headlamp Switch. Removal and Installation

  4. Remove the headlamp switch.
    1. Release the tabs.
    1. Remove the headlamp switch.
    Ford Fusion. Headlamp Switch. Removal and Installation

Installation

  1. To install, reverse the removal procedure.

Test yourself

A quick Ford Fusion quiz: every answer comes with an explanation and a link to the manual page.