Ford Mondeo Quiz
Lighting

General information

In this manual: Lighting
Introduction — 9Overview — 6Child safety — 5Seat belts — 4Supplemental Restraint System — 8Keys and Remote Controls — 4MyKey — 9Locks — 3Safety — 4Steering wheel — 6Wipers and washers — 4Lighting — 15Windows and mirrors — 7Instrument cluster — 4Information Displays — 3Climate control unit — 9Seats — 10Auxiliary power points — 1Storage Compartments — 4Engine Starting and Stopping — 7Unique Driving Characteristics — 1Fuel and Refueling — 7High-voltage battery — 3Transmission — 1Brakes — 5Traction control — 3Electronic Stability Control — 3Parking Aids — 7Cruise control — 4Driver assistance — 21Vehicle Loading — 1Towing — 3Driving tips — 6Roadside assistance in emergencies — 11Fuses — 3Maintenance — 15Vehicle Cleaning — 6Wheels and Tires — 8Capacities and specifications — 3Audio system — 8SYNC — 7SYNC 2 — 10Appendices — 3
~1min read

Condensation in lamp units

The exterior lighting is fitted with vents to accommodate normal fluctuations in air pressure.

Condensation can be a natural consequence of this design. If humid air enters the lamp unit through the vents, condensation may form when the temperature is low. When normal condensation forms, a thin film of mist may appear inside the lens. This film eventually disappears and the mist is expelled through the vents during normal operation.

The mist may take up to 48 hours to disappear in dry weather.

Here are some examples of normal condensation:

  • A thin film of mist (no spots, run marks or large droplets).
  • A thin film of mist covers less than 50% of the lens.

Here are some examples of abnormal condensation:

  • Water accumulation inside the light.
  • Spots, run marks or large droplets inside the lens.

If you notice abnormal condensation, have your vehicle checked by an authorized dealer.

Test yourself

A quick Ford Mondeo quiz: every answer comes with an explanation and a link to the manual page.