Interior Lamp

Tail Light (Type A)

1. Open the trunk.

2. Loosen the trunk lid lock screw and remove the cover.

3. Disconnect the connector, then remove the nuts by turning them counterclockwise.

4. Remove the light.

5. Remove the socket from the assembly by turning the socket counterclockwise until the protrusions on the socket align with the slots in the assembly.

6. Remove the bulb by pulling it out.

7. Install the new bulb by inserting it into the socket.

8. Install the light into the trunk.

9. Install the nuts and connector in place, then install the trunk cover by pressing on the screw.

Stop Light / Tail Light (Type B)

Your vehicle is equipped with LED lights. LED lights are not replaceable. If an LED light does not work, have the vehicle inspected at an authorized HYUNDAI dealer.

Back-Up Light (Type A/Type B)

If the bulb does not light, have the vehicle inspected at an authorized HYUNDAI dealer.