Replacing Instrument Panel Fuse

1. Turn off the engine.

2. Turn off all other switches.

3. Open the fuse panel cover.

4. Refer to the label on the inside of the fuse panel cover to locate the fuse.

5. Remove the suspected fuse. Use the fuse puller provided in the fuse block in the engine compartment.

6. Inspect the removed fuse. Replace it if it is blown. Spare fuses are provided in the instrument panel fuse panel (or in the engine compartment fuse panel).

7. Insert a new fuse of the same rating and make sure it is fully seated in the clips. If it is not seated properly, contact an authorized HYUNDAI dealer. In an emergency, if you do not have a spare fuse, use a fuse of the same rating from a circuit that you do not need for vehicle operation.

If the headlights or other electrical components do not operate and the fuses are good, check the fuse panel in the engine compartment. If a fuse is blown, replace it with one of the same rating.

Fuse Switch

Always keep the fuse switch in the ON position.

If you move the switch to the OFF position, some items, such as the audio system and digital clock, must be reset, and the smart key may not operate correctly.

Information

If the fuse switch is in the OFF position, the message above will appear.

NOTICE

• Always set the fuse switch to the ON position while driving the vehicle.
• Do not move the fuse switch repeatedly. The fuse switch may be damaged.