Turn Signals and Lane Change Signals

To signal a turn, push the lever down for a left turn or up for a right turn to position (A).

If the indicator continues to illuminate without flashing, or flashes abnormally, one of the turn signal bulbs may have burned out and need to be replaced.

One Touch Turn Signal Function

To activate the One Touch Turn Signal function, push the turn signal lever up or down to position (B), then release it.

The lane change signals will flash 3, 5, or 7 times.

You can activate or deactivate the One Touch Turn Signal function or select the number of flashes (3, 5, or 7) in the User Settings (Light) mode on the LCD display (if equipped with a supervision cluster).

For more information, refer to the "LCD Display" section in this chapter.