Hyundai Elantra CN7 Quiz

General Information

In this manual: General Information
Repair and Maintenance Manual for Hyundai Elantra — 0General Information — 0Engine - Mechanical (DOHC 1.8L/2.0L) — 0Engine - Mechanical (DOHC 1.6L) — 0Engine Electrical Equipment — 0Emission Control System — 0Fuel system — 0Clutch — 0Transmission — 0Wheel Drive Shaft and Axle — 0Suspension — 0Steering — 0
~1min read
6special tools

SPECIFICATIONS


SPECIFICATIONS

NOTE M/T – models with manual transaxle.

A/T – models with automatic transaxle.

THREADED FASTENER TIGHTENING TORQUES


THREADED CONNECTION TORQUE SPECIFICATIONS

CAUTION: After removal, replace the self-locking nut with a new one.

SPECIAL SERVICE TOOLS

Tool (Number and Name) Illustration Use
09495-33000 Bearing Puller Снятие внутренней обоймы подшипника со ступицы колеса. Remove the inner bearing race from the wheel hub.
09495-33100 Center Bearing Remover and Installer. 1. Снятие подшипника ступицы колеса из поворотного кулака. 1. Remove the wheel hub bearing from the steering knuckle.

(Use together with 09517-29000) 2. Install the wheel hub onto the steering knuckle.
09517-21500 Front Wheel Hub Remover and Installer 1. Снятие и установка ступицы переднего колеса. 1. Remove and install the front wheel hub.

(Use together with 09517-29000) 2. Measure the front wheel hub bearing preload. (Use together with 09532-11600)
09517-29000 Steering Knuckle Stand 1. Снятие ступицы переднего колеса с поворотного кулака. 1. Remove the front wheel hub from the steering knuckle.

(Use together with 09517-21500) 2. Remove the front wheel hub bearing outer race from the steering knuckle.

(Use together with 09495-33100)
09532-11600 Preload Measurement Adapter (Socket Head) Измерение предварительного натяга подшипника ступицы переднего колеса. Measure the front wheel hub bearing preload.

(Use together with 09517-21500)
09532-31200A Oil Seal Installer Установка подшипника ступицы переднего колеса в поворотный кулак. Install the front wheel hub bearing into the steering knuckle.
09568-34000 Ball Joint Remover Отсоединение шарового шарнира наконечника рулевой тяги и шаровой опоры Disconnect the ball joint of the tie rod end and the lower control arm ball joint from the steering knuckle.

TROUBLESHOOTING


TROUBLESHOOTING

Test yourself

A quick Hyundai Elantra CN7 quiz: every answer comes with an explanation and a link to the manual page.