Blind Spot Detection Indicator Repair Procedures

Removal

1. 1
   Disconnect the negative (-) battery terminal.
2. 2
   Remove the mirror (A).

   

Installation

1. 1
   Install the outside mirror.
2. 2
   Connect the negative (-) battery terminal.

Inspection

1. 1
   Electrical system malfunctions can be diagnosed quickly using the vehicle diagnostic system (GDS). The tester (GDS) provides the following information.

   1. Self-Diagnosis: Malfunction and Code Number Check (DCT)
   2. Current Data: Check the system input/output status.
   3. Actuation Test: Check the system operating status
   4. Additional Functions: Controls other functions, including system parameter setting and zero point adjustment.
2. 2
   Select "Vehicle Model" and the system to be checked to inspect the vehicle with the tester.
3. 3
   After selecting BCM, select the module to check.

   Select "BCM" and "Driver's Seat or Passenger Door Module (DDM/ADM)" to check the driver's seat or passenger door module (DDM/ADM).

4. 4
   Select the "Input/Output Monitor" menu to check the current input/output data status. Input/output data for the sensors related to the driver's seat or passenger door module (DDM/ADM) can be checked.

   

5. 5
   If you force-check the power door lock operation, select "Activation Check".

   

6. 6
   To check the DDM/ADM module fault code, select "Diagnostic Trouble Codes".