Body Electrical System

Repair Procedures

5steps
~30min
2/5difficulty
Done 0 of 5

Diagnosis Using GDS

  1. BSD system defects can be quickly diagnosed using GDS. GDS quickly operates the actuator for control, input/output values, and self-diagnosis.
  2. Connect the GDS cable to the data link connector on the lower driver's side airbag panel, and turn on the GDS.
  3. Select the vehicle model, and then select the BSD system.
  4. Select "Input/Output Monitor" to check the current data of the BSD system.
  5. To forcibly check the operation of each module, select "Actuation Test".

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.