External AMP Repair Procedures

Removal

1. 1
   Disconnect the negative (-) battery terminal.
2. 2
   Open the trunk and remove the left trunk trim. (Refer to Body - "Trunk Trim")
3. 3
   Remove the external amplifier (C) by disconnecting connectors (A), (B) and loosening the mounting nuts.

   

Installation

1. 1
   Install the external amplifier after connecting the connector.
2. 2
   Install the left trunk trim.
3. 3
   Connect the negative (-) battery terminal.

   Make sure the cables and connectors are connected correctly. Check the AVN system for normal operation.

Inspection

1. 1
   The vehicle electrical system malfunction can be quickly diagnosed using the Hyundai Diagnostic System (GDS). The GDS provides the following information.

   1. Self-Diagnosis: Checks malfunction and Diagnostic Trouble Code (DTC)
   2. Current Data: Check the system input/output status.
   3. Actuation Test: Check the system operating status
   4. Additional Functions: Controls other functions, including system parameter setting and zero point adjustment.
2. 2
   Select "Vehicle Model" and the system to be checked to inspect the vehicle with the tester.
3. 3
   Select "AVN" to check the AVN.
4. 4
   Select the "Current Data" menu to check the current status of input/output data. Input/output data for the sensors related to the AVN can be checked.
5. 5
   To forcibly activate the input value of the module under test, select the "Activation Test" option.