Body Electrical System

Overhead Console Lamp Repair Procedures

6steps
~36min
2/5difficulty
Done 0 of 6

Inspection

  1. Remove the overhead console lamp unit and check the continuity between the terminals. If the continuity is not as specified, replace the map lamp switch.

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the mounting screws (2 pcs). Then remove the overhead console (A).
  3. Remove the overhead console after disconnecting the connector (A).
  4. Remove the overhead console lamp (B) by turning the socket.

Installation

  1. Install the overhead console lamp after connecting the connector.
  2. Install the lens by tightening the 2 screws.

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.