Body Electrical System

Rear Combination Lamp Repair Procedures

9steps
~54min
2/5difficulty
Done 0 of 9

Removal

  1. Disconnect the negative (-) battery terminal.
  2. After loosening the nuts (4EA) securing the rear combination lamp and disconnecting the connector (A), remove the outside rear combination lamp assembly.
  3. Remove the bulb (A) by turning it counterclockwise.
  4. Remove the luggage compartment trim (Refer to Body - Luggage Compartment Trim).
  5. Remove the inside rear combination lamp assembly (A) after loosening the nuts (3EA) and disconnecting the connector.
  6. Remove the lamp (A) after separating the inside rear combination lamp assembly.
  7. If it is necessary to replace the bulb, remove the bulb after removing the luggage compartment trim.

Installation

  1. Install the inside combination lamp assembly after assembling the lamp.
  2. Install the rear combination lamp assembly after assembling the lamps and connecting the lamp connector.

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.