Repair Procedures

Adjustment

1. 1
   Check the alignment of the sliding glass (C) located between the front (A) and rear (B) glass, and adjust if necessary. Alignment Adjustment Standard value [mm (in)] (1) Front edge: 0 mm (0 in) (2) Rear edge: 0 mm (0 in)

   

2. 2
   Fully open the sliding glass using the sunroof switch.
3. 3
   Separate both decorative covers (A) and remove the tilt cover (B).

   

   

4. 4
   Press the sunroof switch to fully close the sliding glass.
5. 5
   Adjust the glass height by slightly loosening the screws (A).

   Be careful not to damage the screw.

   

6. 6
   Use the sunroof emergency operation only when it is necessary to open or close the sunroof due to a motor problem.
7. 7
   Use a hex key to open or close the sunroof after removing the headliner. Do not apply excessive force when opening or closing the sunroof. [Sliding Glass Motor "A"]

   

   [Sunshade Motor "B"]

   

8. 8
   If necessary, initialize the sunroof according to the initialization procedure.