Body (Interior and Exterior)
Sunshade Repair Procedures
In this manual: Body (Interior and Exterior)
11steps
~66min
3/5difficulty
Done 0 of 11
Removal
- Open the sunshade by pressing the sunroof switch.

- Leave 10 ~ 20 cm (0.3937 ~ 0.7874 in.) of the sunshade unopened.

- Remove the headliner. (Refer to Headliner - "Headliner Assembly")
- Remove the sunshade bar by inserting a flat-head screwdriver between the top of the front sunshade shoe (A) and the sunshade rod (B).


- Loosen the TORX mounting screws and remove the sunshade bracket (A).

- Remove the sunshade (B) from the slot (A) on the sunshade bracket side.


Installation
- Install the side sunshade bracket (A) into the guide groove (B). Insert the sunshade (A) into the slot (B) on the sunshade bracket side.


- Tighten the TORX mounting screws after installing the sunshade bracket (A).

- Install the sunshade rod (A) over the sunshade shoe (B).

- Insert the sunshade rod (A) into the sunshade shoe (B).

- Install the headliner.
- Fully close the sliding glass using the sunroof switch.
Test yourself
A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?