Hyundai Genesis DH Quiz
Automatic Transmission System (SBC)

Shift Lever Repair Procedures

In this manual: Automatic Transmission System (SBC)
General Information — 9Engine Mechanical System — 103Engine Electrical System — 54Emission Control System — 23Engine Control System/Fuel System — 127Automatic Transmission System (SBC) — 90All-Wheel Drive (AWD) System — 20Drive Shaft and Axle — 27Suspension System — 41Steering — 19Restraints — 56Brake System — 56Body (Interior and Exterior) — 211Body Electrical System — 279Heating, Ventilation, and Air Conditioning — 55
7steps
~42min
2/5difficulty
010203040501410N·mlb·ft
Tightening torque found on this page
Done 0 of 7

Removal

  1. Remove the upper console cover (A).
  2. Pull the shift lever knob (B) upward to remove it.
  3. Remove the knob and boot (A) from the upper console cover.
  4. Remove the floor console. (Refer to Body - "Floor Console")
  5. Disconnect the connector (A) from the shift lever.
  6. Disconnect the shift cable (A) from the shift lever.
  7. Remove the shift lever assembly (A) by removing the four bolts.

    Tightening torque: 9 - 14 N·m

Installation

  1. To install, reverse the removal procedure.

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.