Hyundai Genesis DH Quiz
Engine Mechanical System

Variable Intake Solenoid (VIS) Actuator Repair Procedures

In this manual: Engine Mechanical System
General Information — 9Engine Mechanical System — 103Engine Electrical System — 54Emission Control System — 23Engine Control System/Fuel System — 127Automatic Transmission System (SBC) — 90All-Wheel Drive (AWD) System — 20Drive Shaft and Axle — 27Suspension System — 41Steering — 19Restraints — 56Brake System — 56Body (Interior and Exterior) — 211Body Electrical System — 279Heating, Ventilation, and Air Conditioning — 55
4steps
~24min
2/5difficulty
010203040505.94N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Removal and Installation

  1. Disconnect the negative (-) battery cable from the battery.
  2. Remove the engine cover. (Refer to Engine and Transaxle Assembly - "Engine Cover")
  3. Remove the VIS actuator (A).

    Tightening torque: 3.9 ~ 5.9 N·m

  4. To install, reverse the removal procedure.

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.