Engine Mechanical System

Muffler Repair Procedures

17steps
~102min
4/5difficulty
02040608010058.843N·mlb·ft
Tightening torque found on this page
Done 0 of 17

Removal and Installation

Left Front Muffler
  1. Disconnect the negative (-) battery cable from the battery.
  2. Disconnect the left rear oxygen sensor connector (A).
  3. Remove the transaxle support bracket (A) and left front muffler (B).

    Tightening torque: 39.2 ~ 59 N·m

  4. To install, reverse the removal procedure.
  5. Disconnect the negative (-) battery cable from the battery.
  6. Disconnect the right rear oxygen sensor connector (A).
  7. Remove the transaxle support bracket (A) and right front muffler (B).

    Tightening torque: 39.2 ~ 59 N·m

  8. To install, reverse the removal procedure.
  9. Disconnect the negative (-) battery cable from the battery.
  10. Remove the center muffler (A).

    Tightening torque: 39.2 ~ 59 N·m

  11. To install, reverse the removal procedure.
  12. Disconnect the negative (-) battery cable from the battery.
  13. Remove the left rear muffler (A).

    Tightening torque: 39.2 ~ 59 N·m

  14. To install, reverse the removal procedure.
  15. Disconnect the negative (-) battery cable from the battery.
  16. Remove the right rear muffler (A).

    Tightening torque: 39.2 ~ 59 N·m

  17. To install, reverse the removal procedure.
Right Front Muffler / Center Muffler / Left Rear Muffler / Right Rear Muffler

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.