Clutch Master Cylinder Repair Procedures

DEPOSIT

1. 1
   Remove the lower airbag panel. (Refer to Body - "Lower Instrument Panel")

   

2. 2
   Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner")
3. 3
   Disconnect the battery and battery tray. (Refer to Engine Electrical System - "Battery".)
4. 4
   Remove the ECM. (Refer to Engine Control System - "ECM".)
5. 5
   Remove the fuel filter. [Diesel] (Refer to Fuel System - "Fuel Filter".)
6. 6
   Remove the retaining clip (C), then disconnect the clutch tube (A) and reverse hose (B).[Gasoline 1.2, 1.4]

   

   [Gasoline 1.0 T-GDI, Diesel 1.1, 1.4]

   

7. 7
   Remove the clutch master cylinder assembly (A) by turning it clockwise.

   

REMEDY

1. 1
   To install, perform the removal procedure in reverse order.
2. 2
   After installation, bleed the air from the concentric slave cylinder after filling with brake fluid. (Refer to Clutch - "Release Cylinder".)