Hyundai i20 Quiz
Clutch System

Ignition Lock Control Module Repair Procedures

In this manual: Clutch System
General Information — 17Engine Mechanical System — 79Engine Electrical System — 50Emission Control System — 22Engine/Fuel Control System — 107Clutch System — 27MANUAL TRANSMISSION SYSTEM — 21Drive Shaft and Axle — 18Suspension System — 29Steering System — 21Restraint — 41Braking System — 53Body Work (Interior and Exterior) — 190Body Electrical System — 181Heating, Ventilation and Air Conditioning — 58
5steps
~30min
2/5difficulty
0102030405064N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Inspection

COMPONENT INSPECTION

  1. Remove the clutch and ignition switch.
  2. Turn the ignition switch lever clockwise. Check for continuity in the direction of the arrow.

DEPOSIT

  1. Turn the ignition key to the OFF position and disconnect the negative (-) battery cable.
  2. Disconnect the ignition switch connector and clutch switch connector (A).
  3. Remove the ignition switch and clutch switch (A) after removing the bolts (B - 2 EA).

REMEDY

Test yourself

A quick Hyundai i20 quiz: every answer comes with an explanation and a link to the manual page.