Hyundai i20 Quiz
Clutch System

Clutch Hose Repair Procedures

In this manual: Clutch System
General Information — 17Engine Mechanical System — 79Engine Electrical System — 50Emission Control System — 22Engine/Fuel Control System — 107Clutch System — 27MANUAL TRANSMISSION SYSTEM — 21Drive Shaft and Axle — 18Suspension System — 29Steering System — 21Restraint — 41Braking System — 53Body Work (Interior and Exterior) — 190Body Electrical System — 181Heating, Ventilation and Air Conditioning — 58
9steps
~54min
2/5difficulty
0102030405016.712N·mlb·ft
Tightening torque found on this page
Done 0 of 9

DEPOSIT

  1. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner")
  2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery".)
  3. Remove the ECM. (Refer to Engine Control System - "ECM".)
  4. Remove the fuel filter. [Diesel] (Refer to Fuel System - "Fuel Filter".)
  5. Disconnect the clutch tube (A) after removing the retaining clip (B).[Gasoline 1.2, 1.4]
    [Gasoline 1.0 T-GDI, Diesel 1.1, 1.4]
  6. Remove the clutch tube (A) and the clutch tube support bolts (B - 2 EA) after removing the clip (C). Tightening torque M5EF2: 12.7 ~ 16.7 N·m M6CF1, M6CF3-1: 9.8 ~ 14.7 N·m [M5EF2]
    [M6CF1, M6CF3-1]
  7. Remove the clutch tube from the vehicle.

REMEDY

  1. To install, perform the removal procedure in reverse order.
  2. After installation, bleed the air from the concentric slave cylinder after filling with brake fluid. (Refer to Clutch - "Release Cylinder".)

Test yourself

A quick Hyundai i20 quiz: every answer comes with an explanation and a link to the manual page.