Engine Electrical System
Specifications
In this manual: Engine Electrical System
~5min read
Specification
Ignition System
IGNITION COIL| Item | Specification |
| Primary Winding Resistance (Ω) | 0,607 ± 15% [20 °C] |
| Secondary Winding Resistance (kΩ) | 7,5 ± 15% [20 °C] |
Spark plug
| Item | Specification |
| Good | ELR11ISPC8+ |
| Measure | 0.7~0.8 mm (0.028~0.031 in.) |
Charging System
GENERATOR ▷ 13.5 V 130 A [ISG]| Item | Specification |
| Rated Voltage | 13.5 V, 130 A |
| Usage Rate | 1000 ~ 18000 rpm |
| Voltage Regulator | Built-in Regulator IC |
| ECM Interface Type Regulator | LIN Communication |
| Regulator Set Voltage (Internal Mode) |
14.5 ± 0.3 V |
| CONNECTOR | Terminal 1 (COM) |
| Pulley Type | OAP |

| Item | Specification |
| Rated Voltage | 13.5 V, 120 A |
| Usage Rate | 1000 ~ 18000 rpm |
| Voltage Regulator | Built-in Regulator IC |
| ECM Interface Type Regulator | LIN Communication |
| Regulator Set Voltage (Internal Mode) |
14.5 ± 0.3 V |
| CONNECTOR | Terminal 1 (COM) |
| Pulley Type | OAP |

| Item | Specification |
| Capacity (20 h / 5 h) (Ah) | 70/56 |
| Cold Cranking Amps (A) | 760 (SAE) / 608 (EN) |
| Reserve Capacity (min) | 120 |
▷ CMF45L-DIN [NOT ISG]
| Item | Specification |
| Capacity (20 h / 5 h) (Ah) | 45/36 |
| Cold Cranking Amps (A) | 410 (SAE) / 328 (EN) |
| Reserve Capacity (min) | 80 |
STARTING SYSTEM
STARTER ▷ 12 V, 1.2 kW: ISG| Item | Specification | |
| Rated Voltage | 12V, 1.2kW | |
| Number of sprocket teeth | 13 | |
| Output [no load, 11.5 V] |
Current | Max. 117 A |
| SPEED | Min. 3200 rpm | |
▷ 12 V, 0.9 kW: NOT ISG
| Item | Specification | |
| Rated Voltage | 12V, 0.9kW | |
| Number of sprocket teeth | 11 | |
| Output [no load, 11.5 V] |
Current | Max. 85 A |
| SPEED | Min. 3300 rpm | |
Tightening torque
| Item | N·m | kgf·m | lbf·ft |
| Ignition coil mounting bolt | 9,8 - 11,8 | 1,0 - 1,2 | 7,2 - 8,7 |
| spark plug | 14,7~24,5 | 1,5~2,5 | 10,9~18,1 |
| Capacitor mounting nut/bolt | 9,8 - 11,8 | 1,0 - 1,2 | 7,2 - 8,7 |
| Generator upper mounting bolt | 29,4~41,2 | 3,0~4,2 | 21,7~30,4 |
| Generator lower mounting bolt | 21,6~32,4 | 2.2 to 3.3 | 15,9~23,8 |
| Generator mounting bolt | 21,6~32,4 | 2.2 to 3.3 | 15,9~23,8 |
| Battery positive (+) terminal clamp nut | 7,8 - 9,8 | 0,8 - 1,0 | 5,2~8,7 |
| Battery negative (-) terminal mounting nut | 3,9~5,9 | 0,4~0,6 | 2,9~4,3 |
| Battery Hold-down Bracket Bolt | 8,8~13,7 | 0,9~1,4 | 6,5~10,1 |
| Battery Tray Mounting Bolt | 8,8~13,7 | 0,9~1,4 | 6,5~10,1 |
| Battery Sensor Cable Mounting Bolt | 10,8~13,7 | 1,1~1,4 | 7,9~10,1 |
| Starter motor bolt | 42,2 - 53,9 | 4,3 - 5,5 | 31,1 - 39,8 |
Test yourself
A quick Hyundai i20 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?