Information Mode

This mode displays the service interval (distance and days).

Service Interval

Service

It calculates and displays the maintenance schedule (distance or days) set in the system.

When the set distance or days have elapsed, the message "Service in" is displayed for several seconds each time the engine Start/Stop button is turned on.

Service Required

If you exceed the specified service interval, the message "Service Required" will be displayed each time the vehicle is turned on.

To reset the service interval in kilometers or days that you initially set, press and hold the OK button for more than 1 second.

Service in OFF

If the service interval is not set, the message "Service in OFF" is displayed on the LCD.

Information

If any of the following conditions occur, the distance and number of days until service may be incorrect.

- Battery cable disconnected.
- Fuse switch turned off.
- Battery discharged.

Warning Message

If one of the following occurs, warning messages will be displayed in the information display mode for several seconds.

- Low washer fluid (if equipped)
- Exterior lamp malfunction
- Blind-Spot Collision Warning (BCW) malfunction (if equipped)
- High Beam Assist malfunction (if equipped)
- Tire Pressure Monitoring System (TPMS) malfunction
- Forward Collision-Avoidance Assist (FCA) malfunction (if equipped)
- Smart Cruise Control malfunction (if equipped)
- Service reminder