Canister Repair Procedures

Removal

1. 1
   Turn the ignition switch OFF and disconnect the negative (-) battery cable.
2. 2
   Raise the vehicle.
3. 3
   Disconnect the quick-connect fitting of the vapor hose (A).
4. 4
   Disconnect the quick-connect fitting of the vent hose (B).

   

5. 5
   Loosen the bolts (A), then remove the canister assembly.

   

6. 6
   Loosen the bolt and clips, then remove the canister protector (A).

   

7. 7
   Loosen the bolt and clips, then remove the canister cover (A).

   

8. 8
   Remove the clip, then separate the fuel tank air filter (B) from the canister by turning it in the direction indicated by the arrow in the figure.

   

   

Inspection

1. Visually check for the following items.
   • Cracks or leaks in the canister
   • Poor connection, deformation, or damage of the vapor hose/tube.

   

   A: Canister ↔ Atmosphere B: Canister ↔ Fuel tank C: Canister ↔ Intake manifold

Installation

1. Install in the reverse order of removal.

   Canister mounting bolt: 3.9–5.9 N·m