Hyundai Kona Quiz
Driving Your Vehicle

Cruise Control Operation

In this manual: Driving Your Vehicle
Your Vehicle at a Glance — 5Your Vehicle's Safety System — 63Convenient Features of Your Vehicle — 227Driving Your Vehicle — 123What to Do in an Emergency — 38Maintenance — 80Specifications and Consumer Information — 16
~2min read

1. CRUISE () indicator

2. Set indicator

The cruise control system allows you to drive at speeds above 30 km/h without pressing the accelerator pedal.

WARNING

Observe the following precautions:

  • Always set the vehicle speed below the speed limit in your country.
  • If the cruise control remains on (CRUISE ( ) indicator illuminated on the instrument cluster), the cruise control may be activated unintentionally. Keep the cruise control system off (CRUISE indicator not illuminated) when not using cruise control to avoid unintentional set speed.
  • Use the cruise control system only on open highways in good weather.
  • Do not use cruise control when it may be unsafe to maintain a constant speed:
    - In heavy traffic or road conditions that make it difficult to maintain a constant speed
    - On wet, icy, or snowy roads
    - On hilly or windy roads
    - When driving in windy areas
  • Do not use cruise control when towing a trailer.

NOTICE

When driving at a steady cruising speed in a vehicle with a manual transmission, do not shift to neutral without depressing the clutch pedal, as engine speed will become excessive. If this occurs, depress the clutch pedal or press the cruise control ON/OFF button.

Information

  • During normal cruise control operation, when the SET switch is activated or reactivated after braking, cruise control engages after approximately 3 seconds. This delay is normal.
  • Before cruise control can be activated, the system checks to make sure the brake switch is operating normally. Depress the brake pedal at least once after turning the ignition ON or starting the engine.

Cruise control switch

O (CANCEL): Cancels cruise control operation.

CRUISE ( , ):

Turns the cruise control system on or off.

RES+: Resumes or increases the cruise control speed.

SET-: Sets or decreases the cruise control speed.

Information

First, switch to cruise control mode by pressing the button if the speed limit control system is equipped.

The mode changes as shown below each time the button is pressed.

Test yourself

A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.