Mode Selection

The mode selection button controls the direction of airflow through the ventilation system.

Air can be directed to the floor, instrument panel vents or windshield.

Face Level (B, D)

Airflow is directed to the upper body and face. In addition, each vent can be adjusted to direct the air flowing out of the outlet.

Bi-Level (B, C, D, E)

Airflow is directed to the face and floor.

Floor Level (A, C, D, E)

Most of the airflow is directed to the floor, with a small amount directed to the windshield and side window defroster vents.

Floor/Defrost Level (A, C, D, E)

Most of the airflow is directed to the floor and windshield, with a small amount directed to the side window defroster vents.

Defrost Level (A, D)

Most of the airflow is directed to the windshield, with a small amount directed to the side window defroster vents.

MAX A/C Level (B, D)

To turn on MAX A/C, turn the temperature control knob to the far left position. The airflow is directed to the upper body and face.

In this mode, the A/C and recirculation mode are automatically turned off and selected.

Once the cabin has cooled sufficiently, if possible, change the temperature from MAX A/C and press the A/C button.

Instrument Panel Vents

The vent outlets can be opened or closed () separately using the adjustment ring.

You can also adjust the direction of airflow from these vents using the ventilation control lever, as shown in the illustration.