2nd Row Seat Operation in System

Components and Component Location

Component Location

2nd Row Seat

Luggage Side Trim

Circuit Diagrams

Wiring Diagram

Repair Procedures

Removal

Actuator

1. 1
   Remove the rear seat. (Refer to Body - "Rear Seat Assembly")
2. 2
   Disconnect the actuator connector, then remove the actuator.

   

3. 3
   Disconnect the cable (A), then separate the walk-in actuator.

   

4. 4
   Remove the rear seat walk-in switch (A).

   

5. 5
   Remove the switch using a flat-blade screwdriver, then disconnect the walk-in switch connector (A).

   

6. 6
   Loosen the screw and remove the rear sliding handle (A).

   

7. 7
   Loosen the screw and remove the rear seat track outer cover (A).

   

8. 8
   Disconnect the connector, then remove the walk-in switch (A).

   

9. 9
   Remove the luggage compartment side trim. (Refer to Body - "Luggage Compartment Side Trim")
10. 10
    Remove the cargo area remote folding switch (A).

    

Walk-In Switch Upper / Walk-In Switch Lower / Remote Luggage Trim Folding Switch