Front Seat Cushion Cover

Components and Component Location

Component Location

Repair Procedures

Replacement

When removing with a flat-blade screwdriver or puller, wrap the tool with protective tape to prevent damage to the components. Wear gloves to avoid cutting your hands.

1. 1
   Remove the front seat assembly. (Refer to Front Seat - "Front Seat Assembly")
2. 2
   Remove the front seat outer cover. (Refer to Front Seat - "Front Seat Outer Cover")
3. 3
   Remove the front seat inner cover. (Refer to Front Seat - "Front Seat Inner Cover")
4. 4
   Loosen the mounting screws and remove the front seat cover front cover (A).

   

5. 5
   Remove the protector (A) from the front seat cushion frame.

   

   

   

   

6. 6
   Press the stopper pin and disconnect the front seat cushion connectors (A). Remove the front seat cushion cover.

   

   

7. 7
   Remove the hook-and-loop fastener (A) and the ring clips (B) inside the front seat back cover. Remove the seat back rear cover (C).

   

8. 8
   To install, reverse the removal procedure.

   Make sure the connectors are fully connected. Replace any damaged clips (or pin-type retainers).