Resetting the Driver's Seat Memory System

Perform the following procedure to reset the driver's seat memory system when it does not operate properly.

To reset the driver's seat memory system

1. Turn the ignition switch to the ON position, shift to P (Park), and open the driver's door.

2. Using the seat control switch, set the driver's seat and seatback to the forward position.

3. Press and hold the SET button and move the seat rearward using the control switch for 2 seconds.

When adjusting the driver's seat memory system

1. It starts with a notification sound.

2. The driver's seat and seatback are set to the rear position with a notification sound.

3. The driver's seat and seatback are reset to the default position (center position) with a notification sound.

However, in the following cases, the reset procedure and notification sound may stop.

- A memory button is pressed.
- The control switch is operated.
- Vehicle speed exceeds 2 mph (3 km/h).
- The driver's door is closed.

CAUTION

• If the reset fails, initialize the system again.
• Initialize the system after clearing obstacles around the seat.
• After initialization is complete, adjust the driver position memory system again.

NOTICE

• Repeat the reset procedure when the reset procedure does not fully stop or the notification sound does not stop.
• Make sure there are no obstacles around the driver's seat before resetting the driver's seat memory system.