Hyundai Palisade Quiz
Body Electrical System

Steering Wheel Remote Control (SWRC)

In this manual: Body Electrical System
General Information — 10Engine Mechanical System — 56Engine Electrical System — 28Emission Control System — 21Engine Control System/Fuel System — 42Automatic Transmission System (A8LF1) — 33All-Wheel Drive (AWD) System — 16Drive Shaft and Axle — 19Suspension System — 28Steering — 17Restraints — 20Brake System — 39Body (Interior and Exterior) — 142Body Electrical System — 171Heating, Ventilation, and Air Conditioning — 47Advanced Driver Assistance System (ADAS) — 44
13steps
~78min
3/5difficulty
Done 0 of 13

Components and Component Location

Components

Hyundai Palisade. Components and components location
1. Remote Control Switch (Left: Audio + Voice) 2. Remote Control Switch (Right: Trip + Cruise)

Circuit Diagrams

Wiring Diagram

[Audio/Bluetooth/Voice]
Hyundai Palisade. Schematic diagrams
[Trip + Cruise]
Hyundai Palisade. Schematic diagrams
[Trip + Cruise + Smart Cruise]
Hyundai Palisade. Schematic diagrams

Repair Procedures

Inspection

  1. Check the resistance between the terminals in the left switch position.
    Hyundai Palisade. Repair procedures
    [Audio / Bluetooth]
    Switch Connector Terminal Resistance
    (± 3%)
    SEEK UP 1 - 6 430 Ω
    SEEK DOWN 1 - 6 1.1 kΩ
    MODE 1 - 6 2.11 kΩ
    MUTE 1 - 6 3.11 kΩ
    Volume Up 1 - 6 4.61 kΩ
    Volume Down 1 - 6 6.81 kΩ
    Voice 1 - 6 10.71 kΩ
    END 1 - 6 18.91 kΩ
    SEND 1 - 6 40.91 kΩ
  2. Check the resistance between the terminals in the right switch position. [Trip / Cruise]
    Switch Connector Terminal Resistance (± 3%)
    Paddle Up 2 - 6 390 Ω
    CANCEL 2 - 6 610 Ω
    SET (-) 2 - 6 910 Ω
    RES (+) 2 - 6 1.38 kΩ
    CRUISE ON/OFF 2 - 6 2.13 kΩ
    Cruise Mode 2 - 6 3.63 kΩ
    Smart Cruise 2 - 6 7.93 kΩ
    Paddle DOWN 1 - 6 390 Ω
    Trip Group 1 - 6 610 Ω
    STEP 1 - 6 910 kΩ
    TRIP DOWN 1 - 6 1.38 kΩ
    Trip OK 1 - 6 2.13 kΩ

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the driver airbag module. (Refer to Restraint System - "Driver Airbag Module (DAB) and Clock Spring")
  3. Remove the steering wheel. (Refer to Steering System - "Steering Column and Shaft")
  4. Remove the steering wheel cover (A) after loosening the screws.
    Hyundai Palisade. Repair procedures
  5. Loosen the screws, then disconnect the steering wheel remote control switch connector.
    Hyundai Palisade. Repair procedures
    Hyundai Palisade. Repair procedures
  6. Remove the remote control switches (A).
    Hyundai Palisade. Repair procedures

Installation

  1. Install the steering wheel remote control switch.
  2. Install the steering wheel.
  3. Connect the steering wheel remote control switch connector and the airbag connectors.
    Hyundai Palisade. Repair procedures
    Make sure the switch connector is connected correctly.
  4. Install the driver airbag module.
  5. Connect the negative (-) battery terminal.

Test yourself

A quick Hyundai Palisade quiz: every answer comes with an explanation and a link to the manual page.