Engine Mechanical System
Water Jacket Spacer
In this manual: Engine Mechanical System
4steps
~24min
2/5difficulty
Done 0 of 4
Repair Procedures
Removal
|
- Remove the LH/RH cylinder head and gasket. (Refer to Cylinder Head Assembly - "Cylinder Head")
- Remove the water jacket spacer No. 1 (A) and No. 2 (B).

Installation
- Install the water jacket spacer No. 1 (A) and No. 2 (B).


- Insert the spacer, aligning it with the side protrusion inside the block. It must be below the cylinder head installation surface.


- Insert the spacer, aligning it with the side protrusion inside the block. It must be below the cylinder head installation surface.
- Install the LH/RH cylinder head and gasket. (Refer to Cylinder Head Assembly - "Cylinder Head")
Test yourself
A quick Hyundai Palisade quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
