High Beam Assist System Malfunction and Limitations

High Beam Assist Malfunction

If the High Beam Assist system is not operating properly, the message "Check High Beam Assist (HBA) system" or "Check HBA (High Beam Assist) system" will appear as a warning message andthe warning light will illuminate on the cluster. Have the system inspected by an authorized HYUNDAI dealer.

High Beam Assist Limitations

The High Beam Assist system may not operate correctly in the following situations:

• Vehicle light is not detected due to a damaged lamp or because it is hidden from view, etc.
• The headlights of the vehicle are covered with dust, snow, or water.
• The vehicle's headlights are off but the fog lights, etc. are on.
• There is a lamp similar in shape to a vehicle lamp.
• The headlights are damaged or have not been repaired properly.
• The headlights are not aimed properly.
• Driving on a narrow winding road, an uneven road, or on an uphill or downhill slope.
• The vehicle ahead is only partially visible at an intersection or on a curved road.
• There is a traffic light, reflective sign, flashing sign, or mirror ahead.
• There is a temporary reflector or flashing light ahead (construction site).
• Road conditions are poor, such as wet, icy, or snow-covered roads.
• A vehicle suddenly appears from a curve.
• The vehicle is tilted due to a flat tire or is being towed.
• Vehicle light is not detected due to exhaust gas, smoke, fog, snow, etc.

WARNING

• The High Beam Assist system may sometimes not operate correctly. It is the driver's responsibility to drive safely and always check road conditions for your safety.
• If the High Beam Assist system does not operate normally, change the headlight position manually between high and low beam.