Turn Signal and Lane Change Signal

The ignition must be ON for the turn signals to operate.

To turn on the turn signals, move the lever up or down (A).

The green arrow-shaped indicator lights on the instrument panel show which turn signal is operating.

The turn signals turn off automatically after the turn is completed.

If the turn signal indicator continues to flash after the turn is completed, manually move the lever to the OFF position.

To signal a lane change, slightly move the turn signal lever and hold it in that position (B). When released, the lever will return to the OFF position.

If the indicator stays on continuously or flashes at an abnormal rate, one of the turn signal bulbs may have burned out and needs to be replaced.

NOTE

If the indicator flashes too fast or too slow, a turn signal bulb may have burned out, or there may be a poor connection in the electrical circuit.