Hyundai Tucson LM Quiz
Heating, Ventilation, and Air Conditioning

Cluster Ion Generator Repair Procedures

In this manual: Heating, Ventilation, and Air Conditioning
General Information — 1Engine Mechanical System — 44Engine Electrical System — 45Emission Control System — 24Engine Control System/Fuel System — 93Clutch System — 13Manual Transmission — 18Automatic Transmission — 87Four-Wheel Drive (4WD) System — 26Drive Shaft and Axle — 29Suspension System — 35Steering — 20Restraints — 47Brake System — 36Body (Interior and Exterior) — 53Body Electrical System — 202Heating, Ventilation, and Air Conditioning — 58
10steps
~60min
3/5difficulty
Done 0 of 10

Inspection

  1. Press the OFF button more than 4 times within 2 seconds while holding down the MODE button.
    Display Description of Malfunction
    00 Normal
    50 Cluster Ionizer Generator Malfunction

    * The diagnostic procedure refers to the DTC.

Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the extension cover (A).
  3. Disconnect the damper (A) from the glove box (B).
  4. Remove the glove box lift (A).
  5. Disconnect the spring (A), then remove the glove box (B).
  6. Remove the passenger airbag panel (A).
  7. Remove the glove box housing (A).
  8. Remove the shower duct (A).
  9. Loosen the screws and remove the cluster ionizer (A).
  10. Install in the reverse order of removal.

Test yourself

A quick Hyundai Tucson LM quiz: every answer comes with an explanation and a link to the manual page.